LG 24HR513C: 24 Inch 2MP IPS Clinical Review Monitor with FDA 510(k) Class II Clearance and Internal Front Sensor Calibration
Authorized LG clinical imaging solutions supplier. The LG 24HR513C is a 24-inch 2MP (1920×1200) IPS clinical review monitor with FDA 510(k) Class II clearance for diagnostic interpretation of general radiology, CT, MRI, and ultrasound studies (excluding mammography). The built-in front calibration sensor and LG Calibration Studio Medical (LCS Medical) enable hardware DICOM calibration and automated QA testing without an external photometer – significantly reducing calibration service requirements in multi-monitor reading room environments. At 600 cd/m2 peak brightness, the 24HR513C exceeds the ACR-AAPM-SIIM minimum of 350 cd/m2 for diagnostic reading. Focus View and Pathology Mode address specialized clinical review workflows. DisplayPort daisy chain Out simplifies dual-monitor reading station wiring from a single graphics port.
Core specifications: 24-inch IPS panel (1920×1200, 16:10) with 600 cd/m2 brightness and 350 cd/m2 stabilized output. DICOM Part 14 compliance with internal front sensor and LCS Medical QA software. HDMI, DisplayPort In, DVI-D inputs plus DP Out daisy chain. Dual USB 3.0 Upstream ports and two USB 3.0 Downstream ports. Focus View, Pathology Mode, Auto Pivot, Auto Luminance Sensor, and One-Click stand. Full ergonomic range: 150mm height, plus/minus 45 degree swivel, plus/minus 90 degree pivot.
Need pricing? Get a quote with lead times and volume discounts within one business day.
Internal Front Sensor, FDA 510(k) Class II and Specialized Viewing Modes
Three capabilities set the 24HR513C apart for clinical and diagnostic review environments. The internal front calibration sensor eliminates the need for external photometers in routine DICOM QA, making it the most operationally efficient LG clinical display in multi-monitor reading room fleets. FDA 510(k) Class II clearance confirms the 24HR513C as a diagnostic display for general radiology, CT, MRI, and ultrasound – not limited to secondary clinical review. Focus View and Pathology Mode address specialized clinical review tasks that standard diagnostic monitors do not accommodate.
Panel: 24″ IPS, 1920×1200 (2MP), 16:10
Brightness: 600 cd/m2 typical | Stabilized: 350 cd/m2
Contrast Ratio: 1000:1
Viewing Angle: 178/178 degrees
Color Depth: 8-bit
DICOM Compliance: Factory calibrated to DICOM Part 14 grayscale display function
Internal Front Sensor: Built-in front-facing luminance sensor enables hardware LUT calibration without an external photometer
LCS Medical: LG Calibration Studio Medical software for DICOM calibration, automated QA scheduling, and QC reporting aligned with AAPM TG18, ACR, DIN 6868-157, and IEC 62563-1
Brightness Stabilization: Stabilized output at 350 cd/m2 for consistent luminance between calibration cycles
FDA 510(k) Class II: Cleared for diagnostic interpretation of general radiology, CT, MRI, and ultrasound (not mammography)
Focus View: Highlights a selected region of interest while dimming surrounding display content – directs visual attention during clinical review, case presentations, and MDT meetings
Pathology Mode: Color profile calibrated for microscope-equivalent color accuracy in pathology correlation workflows
Auto Luminance Sensor: Adjusts brightness automatically based on ambient room light levels
DisplayPort Daisy Chain: DP Out passes signal to a second monitor in series from a single workstation DP output – enables dual reading station without additional graphics ports
Video Inputs: HDMI, DisplayPort In, DVI-D – broad compatibility including legacy workstations
Auto Pivot: Screen image rotates automatically when the panel is physically pivoted to portrait orientation
Stand: 150mm height, -5 to +25 degree tilt, plus/minus 45 degree swivel, plus/minus 90 degree pivot
One-Click Stand: Tool-less assembly. VESA 100x100mm for arm mounting
How the 24HR513C compares against a standard office monitor:
The 24HR513C built-in front sensor changes the operational calculus of DICOM compliance for multi-monitor reading rooms. Displays without internal sensors require periodic external photometer visits to each monitor for DICOM calibration – a service cost that multiplies across a large reading room fleet. The 24HR513C internal sensor allows LCS Medical to perform hardware LUT calibration on a scheduled basis automatically, without scheduling a technician visit or removing the display from service. For radiology practices with 10 to 50 monitors across multiple reading stations, the calibration operational savings compound significantly over a 5-year display lifecycle.
Full Technical Specifications
Complete reference data for IT procurement, biomed review, and reading room planning. Expand each category for the full specification set required by radiology department heads, IT administrators, and facilities teams evaluating the 24HR513C for PACS workstations and clinical reading room configurations.
| Resolution | 1,920 x 1,200 (2MP) |
| Panel Type | IPS |
| Screen Size | 24″ (16:10) |
| Brightness (Typ.) | 600 cd/m2 peak | 350 cd/m2 stabilized |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178 / 178 degrees |
| Color Depth | 8-bit |
| DICOM Compliance | Part 14 with internal front sensor |
| Calibration Software | LG Calibration Studio Medical (LCS Medical) |
| Weight (with stand) | 7.1 kg |
| Weight (without stand) | 4.35 kg |
| Dimensions with Stand (W x H x D) | 574.2 x 559.4 x 248.2 mm |
| Dimensions without Stand (W x H x D) | 574.2 x 382.4 x 59.3 mm |
| VESA Mount | 100×100 mm |
| Height Adjustment | 150mm |
| Tilt | -5 to +25 degrees |
| Swivel | plus/minus 45 degrees |
| Pivot | plus/minus 90 degrees with Auto Pivot |
| Video Inputs | HDMI, DisplayPort In, DVI-D |
| DisplayPort Out | Yes – daisy chain to second monitor |
| USB Upstream | USB 3.0 x2 |
| USB Downstream | USB 3.0 x2 |
| Power Consumption (Max.) | 65W |
| DC Off Mode | Less than 0.3W |
| Calibration | Internal front sensor, LCS Medical (hardware DICOM QA) |
| Viewing Modes | Focus View, Pathology Mode |
| Auto Features | Auto Pivot, Auto Luminance Sensor |
| Medical Certification | FDA 510(k) Class II, CE MDR, ISO 13485, KGMP |
| Safety / Environmental | IEC 60601-1, IEC 60601-1-2, UL/cUL, RoHS, REACH, WEEE |
Clinical Applications
Deployed across radiology reading rooms, general practice clinical workstations, PACS review stations, and multi-display diagnostic environments where FDA 510(k) clearance, self-calibration capability, daisy chain connectivity, and specialized viewing modes provide operational and clinical value.
FDA 510(k) Class II clearance and 600 cd/m2 peak brightness – exceeding the ACR 350 cd/m2 minimum – make the 24HR513C suitable for diagnostic interpretation of general radiology, CT, MRI, and ultrasound studies in reading rooms and clinical workstations where primary diagnostic reading is performed.
The internal front sensor and LCS Medical automated calibration scheduling eliminate external photometer service visits for each monitor. For reading rooms with 10 to 50 displays, the accumulated calibration time and service cost savings over a 5-year fleet lifecycle represent a significant operational advantage versus monitors requiring external calibration equipment.
Pathology Mode applies a color profile calibrated for microscope-equivalent color accuracy, enabling digital pathology review alongside clinical imaging studies on the same display without a separate dedicated pathology monitor at the workstation. Focus View isolates specific regions of digital pathology slides for detailed inspection.
DisplayPort Out passes the video signal to a second connected display in series from a single workstation DP output. This configures a dual-monitor reading station – pairing the 24HR513C with a 3MP diagnostic display for example – without requiring a second graphics card port or video distribution hardware.
Auto Pivot automatically rotates the screen image when the panel is physically pivoted to portrait orientation – convenient for radiology report reading, EMR document review, and long-format image inspection. The 150mm height and full swivel range accommodate different desk configurations and reader posture preferences.
Calibration, Connectivity and Viewing Mode Details
Internal front sensor calibration, specialized clinical viewing modes, DisplayPort daisy chain, Auto Pivot, and high-brightness DICOM compliance combine to support diagnostic reading rooms, PACS workstations, and general clinical review environments. Expand each section for detail required by radiologists, IT administrators, and biomed teams evaluating the 24HR513C.
Built-In Front Calibration Sensor: The 24HR513C incorporates an internal front-facing luminance sensor that enables hardware DICOM calibration without an external photometer. The sensor measures display output directly and corrects the hardware LUT to maintain DICOM Part 14 grayscale accuracy – reducing service visit frequency and calibration cost in multi-monitor reading room environments compared to displays requiring external calibration equipment.
LG Calibration Studio Medical (LCS Medical): LCS Medical provides DICOM calibration, quality assurance testing, and display QC reporting aligned with AAPM TG18, ACR, DIN 6868-157, IEC 62563-1, and related clinical display standards. Scheduled automated calibration and QA reporting support formal departmental QA programs.
Brightness Stabilization: Stabilized output at 350 cd/m2 maintains consistent luminance between calibration cycles over the display life.
Focus View: Highlights a user-defined region of interest on the display while dimming surrounding content. This isolates the area under review – a specific organ, structure, or lesion – for detailed inspection without distraction from adjacent image content, which is useful during clinical review sessions and case presentations where attention direction matters.
Pathology Mode: Applies a color profile calibrated to reproduce the color accuracy and tonal characteristics of microscope slide viewing, supporting pathology correlation workflows where digital slide review is compared against clinical images on the same display. Maintains consistent color rendering for pathology review without a separate dedicated pathology workstation display.
Auto Luminance Sensor: Adjusts display brightness automatically based on ambient room light levels, reducing eye strain in reading rooms where lighting conditions vary throughout the clinical day.
Video Inputs: HDMI, DisplayPort In, and DVI-D provide broad compatibility with PACS workstations, modality output systems, and legacy clinical equipment. DVI-D accommodates older radiology workstations and diagnostic equipment that do not support HDMI or DisplayPort.
DisplayPort Daisy Chain: The DP Out port connects a second monitor in series from a single graphics port – enabling a dual-display reading station from a workstation with one DisplayPort output. Commonly used to pair the 24HR513C with a 3MP diagnostic display for a complete PACS reading station without additional graphics card ports or video distribution hardware.
USB 3.0 Hub: Two USB 3.0 Upstream ports and two USB 3.0 Downstream ports provide multi-system peripheral connectivity at the workstation.
Auto Pivot: When the panel is physically rotated to portrait orientation, the display signal automatically rotates to match – eliminating the need for manual display rotation settings in the operating system for radiology report reading and long-format image review in portrait mode.
Full Ergonomic Range: 150mm height adjustment, -5 to +25 degree tilt, plus/minus 45 degree swivel, and plus/minus 90 degree pivot – the full range of reading station adjustments for extended radiologist reading sessions and variable desk configurations.
One-Click Stand: Tool-less assembly for quick installation and workstation setup. VESA 100x100mm for monitor arm mounting as an alternative to the desk stand.
600 cd/m2 Peak Brightness: The 24HR513C peak brightness of 600 cd/m2 exceeds the ACR-AAPM-SIIM minimum luminance recommendation of 350 cd/m2 for diagnostic interpretation of general radiology studies. This provides diagnostic-grade luminance headroom for reading in environments with variable ambient light levels.
DICOM Part 14 Compliance: Factory calibrated to DICOM Part 14 grayscale display function for consistent luminance reproduction across modalities at diagnostic and clinical review workstations.
FDA 510(k) Class II: Cleared by FDA as a Class II medical device for use in diagnostic interpretation of general radiology, CT, MRI, and ultrasound studies. Not intended for mammography interpretation.
Regulatory Compliance & Quality Standards
The LG 24HR513C holds FDA 510(k) Class II clearance for diagnostic interpretation of general radiology, CT, MRI, and ultrasound (excluding mammography). CE MDR, ISO 13485, KGMP, IEC 60601-1/-1-2, and UL/cUL certifications confirm compliance with international medical device safety and quality standards. LCS Medical and the internal front sensor support formal departmental QA programs aligned with AAPM TG18, ACR, and IEC 62563-1 requirements. Medical Outfitters Inc. is independently ISO 13485:2016 certified.
DICOM Part 14: Factory calibrated to DICOM Part 14 grayscale display function for diagnostic and clinical review applications.
Internal Front Sensor: Built-in sensor enables hardware LUT calibration without an external photometer, supporting automated QA workflows.
LCS Medical: LG Calibration Studio Medical supports DICOM calibration and QC testing aligned with AAPM TG18, ACR, DIN 6868-157, IEC 62563-1, and other clinical display standards for formal departmental QA programs.
Brightness Stabilization: Stabilized output at 350 cd/m2 maintains luminance consistency between calibration cycles.
FDA 510(k) Class II: Cleared by FDA as a Class II medical device for diagnostic interpretation of general radiology, CT, MRI, and ultrasound studies in the United States. Not intended for mammography.
CE MDR: Compliant with EU Medical Device Regulation (2017/745) for deployment in European clinical environments.
ISO 13485: Manufactured under ISO 13485 quality management system standards. Medical Outfitters is independently ISO 13485:2016 certified as a clinical imaging solutions supplier.
KGMP: Korean Good Manufacturing Practice certified for Korean healthcare and government procurement.
IEC 60601-1: General electrical safety for medical electrical equipment – confirms safe deployment in clinical patient care environments.
IEC 60601-1-2: EMC compliance – ensures the monitor does not interfere with adjacent clinical equipment in reading rooms and workstation areas.
UL/cUL: UL Listed for the U.S. and Canada.
Environmental: RoHS, REACH, and WEEE compliant.
Power: Maximum 65W. DC Off mode less than 0.3W.
PACS & Calibration Compatibility Review
Share your PACS system, daisy chain display layout, and LCS Medical QA schedule requirements. Our diagnostic imaging specialists confirm the 24HR513C signal routing, internal sensor calibration setup, and AAPM TG18 / IEC 62563-1 compliance configuration before your order ships.
Hospital Procurement & RFP Support
Volume pricing, technical documentation, and logistics coordination for radiology practices, imaging centers, and GPO procurement teams. Full biomed documentation package available for diagnostic display procurement review.
Frequently Asked Questions
Common questions from radiologists, imaging center administrators, IT managers, and procurement teams evaluating the LG 24HR513C for diagnostic reading stations, multi-monitor reading rooms, PACS workstations, and pathology correlation workflows.
Yes – for general radiology, CT, MRI, and ultrasound diagnostic interpretation. The LG 24HR513C holds FDA 510(k) Class II clearance as a diagnostic display device. Its 600 cd/m2 peak brightness exceeds the ACR-AAPM-SIIM minimum of 350 cd/m2 for diagnostic reading, and DICOM Part 14 compliance with internal front sensor calibration supports formal QA programs. It is not intended for mammography interpretation – for mammography see dedicated 5MP digital mammography displays meeting MQSA requirements.
The integrated front-facing luminance sensor enables hardware DICOM calibration directly from LCS Medical software without an external photometer. The sensor measures the actual light output at the display surface and corrects the internal hardware lookup table (LUT) to match the DICOM Part 14 target. In multi-monitor reading room environments, this eliminates the need to schedule periodic external photometer service visits for each display – reducing the time and cost of maintaining DICOM compliance across the reading room monitor fleet.
LCS Medical is LG’s medical display calibration and QA software. It supports DICOM calibration using the built-in front sensor, automated calibration scheduling, and quality assurance testing aligned with clinical display standards including AAPM TG18, ACR, DIN 6868-157, and IEC 62563-1. LCS Medical generates QC reports for documentation in departmental QA programs and regulatory review. It works with the front sensor to perform calibration automatically on a scheduled basis, maintaining DICOM compliance between manual service intervals.
Focus View highlights a selected region of interest on the display while dimming the surrounding content. This directs visual attention to a specific area – a lesion, structure, or organ – during clinical review and case presentations. It is useful during MDT meetings and case discussions where drawing the team’s attention to a specific finding on the image is needed, and during personal review where isolating a region reduces distraction from adjacent image content.
Pathology Mode applies a specialized color profile calibrated to reproduce the color characteristics of microscope slide viewing on the display. It is intended for pathology correlation workflows – where digital pathology slide content or pathology images are reviewed alongside clinical imaging studies on the same workstation. Pathology Mode maintains consistent hue and saturation rendering for tissue color accuracy without requiring a separate dedicated pathology display at the workstation.
The 24HR513C includes both a DisplayPort In and a DisplayPort Out. The DP Out passes the video signal through to a second connected monitor in series, creating a dual-display reading station from a single DisplayPort output on the workstation graphics card. This eliminates the need for a second graphics card port or additional video distribution hardware for dual-monitor configurations. A common setup pairs the 24HR513C as the primary display with a 3MP diagnostic display daisy-chained via DP Out for a complete PACS reading station.
Yes. Auto Pivot uses the monitor’s internal orientation sensor and standard display driver support to automatically rotate the screen image when the panel is physically pivoted to portrait orientation. It functions with Windows and most major operating systems that support display rotation via standard graphics drivers, without requiring additional software or special configuration. The operating system detects the orientation change and applies the rotation automatically when Auto Pivot is enabled.
Through Medical Outfitters Inc., ISO 13485:2016 certified, Miami, FL. Factory-new units with configuration support and nationwide delivery. Specialists in clinical review and diagnostic monitors, radiology display solutions, and PACS workstation configurations. Call (305) 885-4045 or request a quote online. Volume pricing and GPO-compatible quoting available for hospital systems and multi-site imaging networks.
Request Pricing or a Demo
The LG 24HR513C delivers FDA 510(k) Class II diagnostic clearance, internal front sensor DICOM calibration via LCS Medical, 600 cd/m2 peak brightness, Focus View, Pathology Mode, and DisplayPort daisy chain connectivity in a 24-inch 2MP IPS display. For radiology practices and imaging centers evaluating diagnostic display solutions with self-calibration capability, the 24HR513C reduces long-term calibration service costs while delivering diagnostic-grade performance.
At Medical Outfitters, ISO 13485:2016 certified, we provide configuration support, PACS workstation setup guidance, and nationwide delivery for clinical and diagnostic display solutions. Our specialists help design the optimal reading room configuration for your workflow, calibration requirements, and procurement budget.
Hospital & Imaging Center Procurement
GPO-compatible quoting, volume pricing, and net payment terms for hospital radiology departments, imaging centers, and multi-site reading room networks. Full documentation package available for biomed, IT, and procurement review.
Single Workstation & Small Quantity
Single-unit and small quantity orders with same-day processing. Nationwide delivery for individual reading station upgrades and small practice configurations.
Related Clinical Review & Diagnostic Monitors
Other clinical review and diagnostic display solutions available from Medical Outfitters for higher resolution, 8MP IPS imaging, or large format primary diagnostic reading station requirements.
LG 27HJ712C-W
27″ 8MP IPS – DICOM Part 14 – FDA Class I – LG Calibration Studio – Higher Resolution Upgrade
View Product
LG 27HJ713C
27″ 8MP IPS – DICOM Part 14 – FDA Class I – Two-Way Pivot – 150mm Height – 3.5mm Audio
View Product
LG 32HL512D
31.5″ 8MP IPS – Primary Diagnostic – DICOM Part 14 – 6MP Grayscale – Larger Format Reading Station
View ProductRequest a Quote Today
Get in touch with Medical Outfitters today to request your personalized quote and outfit your facility with confidence.
