DMS Imaging Stratos C: Compact Bone Densitometer
Authorized DMS Imaging bone density equipment supplier. The Stratos C is a compact pencil-beam DXA machine purpose-built for imaging departments and clinics that need full diagnostic capability without the footprint or price point of a large-format system. It solves three persistent challenges in bone density scanning: oversized platforms that cannot fit in smaller rooms, high acquisition costs that place DEXA technology out of reach for independent practices, and slow imaging workflows that limit daily patient volume.
Core densitometry technology: the Digital Fast Beam, DMS Imaging’s enhanced pencil-beam design, recognized as the fastest pencil-beam device on the market, delivering high-resolution bone mineral density images with T-score and Z-score per site in seconds. Optional 3D-DXA integration transforms routine hip scans into three-dimensional femur visualizations validated against QCT in a multicenter clinical study. Built-in FRAX fracture risk assessment, HSA hip structural analysis, VAT/SAT visceral adipose tissue analysis, and sarcopenia assessment make the Stratos C a complete bone density scanner for osteoporosis programs, fracture risk stratification, and body composition clinics alike.
Need pricing? Get a quote with lead times and volume discounts within one business day.
Pencil-Beam DXA, 3D Integration & Compact Design
Three core technologies differentiate the Stratos C from standard bone density machines and traditional DEXA scan equipment. Each addresses a specific gap in conventional densitometry platforms. Full technical detail is in the expandable sections below.
Digital Fast Beam: DMS Imaging’s proprietary enhanced pencil-beam design, engineered to be the fastest pencil-beam DXA device on the market while delivering superior image quality over standard pencil-beam systems
BMD Output: Bone mineral density (g/cm²) with T-score and Z-score calculated per site for clinical reporting and treatment decisions
Scan Regions: Lumbar spine (L1-L5), femur, dual femur, and forearm, covering all standard bone densitometry sites
DVA (Digital Vertebral Assessment): Automatic morphometric measurement of lateral spine with GENANT classification, also available in AP positioning
HSA (Hip Structural Analysis): Measures structural geometry of cross-sections in the proximal femur including HAL, FNA, IH, and FNAL parameters for fracture risk prediction
FRAX Integration: Sheffield University fracture risk assessment tool available for more than 50 countries, integrated directly into the reporting workflow
Orthopaedics Mode: Bone density calculation around prosthetics (knee, elbow, shoulder, hip) and custom Region of Interest (ROI) selection
Paediatrics Mode: Bone analysis parameters for the young patient population
QuickView: Fast acquisition mode optimizing workflow for routine exams
Easy Scan Repositioning: Computer-assisted patient positioning with laser placement helper before every acquisition
3D-DXA Technology: Software application that registers a 3D statistical model onto the patient’s hip DXA scan using a model-based algorithm to create a 3D map of cortical surface density, a breakthrough validated against QCT in a multicenter clinical study with strong correlations found between the two methods
Cortical Surface Density: Measures and maps cortical surface density across the proximal femur in three dimensions
Volumetric Trabecular Density: Separate measurement of volumetric trabecular bone density for compartment-specific fracture risk analysis
Normative Comparison: Cortical and trabecular measurements compared against normative data for population-referenced reporting
Automated 3D Workflow: Retrospective analysis, patient follow-up, and automated report generation within the 3D-DXA module
Compact Footprint: Designed specifically for smaller imaging rooms where conventional DEXA systems cannot be installed
Data Importation: Unique capability to import data from competitor equipment, allowing physicians to keep full patient history when switching platforms
DICOM Connectivity: Export to PACS/RIS via DICOM; import/export across multiple workstations for multi-user environments
How the Stratos C compares against a conventional bone density scanner:
The Stratos C extends beyond standard bone density scanning with a full suite of body composition tools. Multi-site body segmentation provides fat and lean mass results for nine regions: left and right legs, left and right arms, left and right ribs, T-spine, L-spine, and pelvis. Metabolic outputs include Android/Gynoid Ratio, Body Mass Index, Fat Mass Index, and Basal Metabolic Rate. A patented VAT/SAT algorithm estimates visceral and subcutaneous adipose tissue in the android area. Results are significantly correlated with CT scan results, providing a radiation-efficient alternative for monitoring cardiovascular risk and dietary treatment effects. Sarcopenia assessment tracks skeletal mass, quality, and strength using published clinical definitions. Color mapping and patient trending with graphs and tables complete the reporting suite, all from a single bone density scan machine appointment.
Full Technical Specifications
Complete reference data for capital procurement, RFP submissions, and biomedical review. This specification set is required by radiology directors, purchasing teams, and biomedical engineers evaluating DXA scan equipment and bone densitometry systems. Expand each category.
| Technology | Digital Fast Beam pencil-beam DXA (fastest pencil-beam device on market) |
| Scan Regions | Lumbar spine (L1-L5), femur, dual femur, forearm, full body |
| BMD Output | Bone mineral density (g/cm²) with T-score and Z-score per site |
| Exam Speed | Seconds per acquisition |
| Positioning | Computer-assisted easy scan repositioning with laser placement helper |
| FRAX | Integrated fracture risk assessment tool (Sheffield University), available for 50+ countries |
| HSA | Hip Structural Analysis: HAL, FNA, IH, FNAL proximal femur geometry |
| DVA | Digital Vertebral Assessment with GENANT classification (lateral and AP) |
| Orthopaedics Mode | Bone density around prosthetics (knee, elbow, shoulder, hip) with custom ROI |
| Paediatrics Mode | Bone analysis parameters for the young patient population |
| 3D-DXA | Optional integration for 3D femur visualization from standard DXA acquisitions |
| Compartment Analysis | Cortical and trabecular bone compartments assessed separately |
| Clinical Benefit | Detailed bone microstructure insights to support fracture risk assessment and treatment planning |
| Segmentation | 9-region full-body: left/right legs, left/right arms, left/right ribs, T-spine, L-spine, pelvis |
| Color Mapping | Fat, lean, and bone mass color mapping for patient communication and monitoring |
| Metabolic Outputs | Android/Gynoid Ratio, Body Mass Index, Fat Mass Index, Basal Metabolic Rate |
| VAT/SAT Analysis | Patented algorithm estimates visceral and subcutaneous adipose tissue (correlated with CT scan results) |
| Sarcopenia | Sarcopenia assessment based on published clinical definitions, tracking skeletal mass, quality, and strength |
| Interface | Intuitive end-user software with patient repositioning tools |
| Reporting | Automated report and letter generation |
| Patient Tracking | Longitudinal patient progress monitoring across appointments |
| Patient Trending | Longitudinal graphs and tables tracking patient data evolution across appointments |
| Reference Population | Facility-specific reference population development in addition to the existing database |
| Automatic Letters | Automatic patient and referring physician letter generation from customizable templates |
| Data Import/Export | Export to PACS/RIS via DICOM; import from competitor equipment to retain full patient history on platform transition |
| DICOM | DICOM compliant for direct PACS integration |
| Footprint | Compact, suitable for small imaging rooms and specialty clinics |
| Data Sharing | Full import/export for referring providers, labs, and electronic records |
Clinical Applications
Deployed across a full range of bone health and body composition programs, wherever accurate DXA scan results, fast throughput, and a compact footprint make the difference between offering a service or referring patients elsewhere.
High-resolution BMD with T-score and Z-score per site at the lumbar spine, femur, and dual femur, with FRAX fracture risk integrated directly into the report for 50+ countries.
HSA measures proximal femur structural geometry (HAL, FNA, IH, FNAL), while 3D-DXA provides QCT-validated cortical and trabecular compartment analysis for precision fracture risk stratification.
The patented VAT/SAT algorithm estimates visceral and subcutaneous adipose tissue using DXA, providing a radiation-efficient alternative to CT for monitoring cardiovascular risk and the effects of diet or treatment.
Sarcopenia screening uses published clinical definitions to assess skeletal mass, quality, and strength. Regional body segmentation across nine body zones tracks lean mass loss in at-risk patient populations.
Android/Gynoid Ratio, Fat Mass Index, Basal Metabolic Rate, and regional lean mass data support preparation programs for high-level athletes and body composition monitoring across training cycles.
Orthopaedic mode calculates bone density around prosthetic implants at the knee, elbow, shoulder, and hip, with custom ROI selection for precise area-specific measurement.
DXA Acquisition, Reporting & DICOM Integration
A complete bone densitometry solution designed to integrate into existing clinical infrastructure without complex installation requirements. Whether adding bone density scanning to an existing practice or upgrading from an older dxa machine, the Stratos C connects directly to PACS and EMR systems. Expanded workflow details are in the expandable sections below.
Patient positioning is confirmed by the built-in positioning assistance system before each scan begins. The enhanced pencil-beam passes over the target region in seconds, collecting dual-energy data for bone mineral density calculation. Results are immediately available for review, report generation, and PACS routing via DICOM without manual export steps.
When 3D-DXA is enabled, standard femur DXA acquisitions are automatically processed into three-dimensional bone visualizations. Cortical and trabecular compartments are assessed separately, with compartment-specific density values included in the clinical report. This adds diagnostic depth to routine bone density scanning without additional acquisitions or patient time.
Full-body composition scans generate fat and lean tissue color maps along with regional and total body composition metrics. Metabolic indicator data is included in the output for endocrinology and sports medicine reporting. The software suite automatically generates patient letters and clinical reports, reducing administrative time between appointment and results delivery.
The Stratos C is DICOM compliant, enabling direct image routing to PACS archive and review workstations. Patient data from prior appointments can be imported directly into the system, and scan results can be exported to referring providers, labs, and EMR platforms. No dedicated server or complex IT infrastructure is required for standard installation.
Regulatory Compliance & Safety
FDA cleared for bone mineral density measurement and body composition assessment. CE Class IIb certified medical device, manufactured by APELEM and designed in France by DMS Imaging, the European leader in bone densitometry equipment. Medical Outfitters is an ISO 13485:2016-certified supplier of diagnostic bone density scanning equipment, meaning every Stratos C ships through a documented, audited quality management system. Full compliance documentation is available in the expandable sections below.
FDA Cleared: The DMS Imaging Stratos C is FDA cleared for bone mineral density measurement and body composition assessment. Suitable for use in U.S. hospital radiology departments, endocrinology clinics, orthopedic practices, and sports medicine facilities.
ISO 13485: Medical Outfitters Inc. is independently ISO 13485:2016 certified as a bone density scanner supplier, ensuring every unit ships through a fully audited quality management system.
DICOM Compliance: Full DICOM support for direct PACS integration without middleware. Images and bone density data route automatically to archive and review workstations following each acquisition.
Data Standards: Scan results meet clinical reporting standards for bone mineral density and body composition, suitable for integration with fracture risk calculators and clinical decision tools.
RoHS: Restriction of Hazardous Substances compliant.
REACH: EU REACH chemical regulation compliant.
Facility & PACS Compatibility Review
Provide your room dimensions, existing PACS configuration, and EMR platform. Our team confirms the Stratos C fits your space and DICOM setup, and coordinates installation before shipment.
Capital Equipment & RFP Support
Volume pricing, technical documentation, and multi-site logistics for bone densitometry program deployments. We support radiology directors, biomedical engineers, and purchasing departments evaluating DEXA scan equipment. Contact us for RFP packages.
Frequently Asked Questions
Quick answers to the most common purchase and technical questions about the DMS Imaging Stratos C bone densitometer. Tap any question to expand.
The DMS Imaging Stratos C is a compact pencil-beam DXA bone densitometer with full-body scanning, 3D-DXA femur visualization, cortical and trabecular bone compartment analysis, whole-body composition assessment, and intuitive software. Designed for clinics and imaging departments with limited space and budget.
Pricing varies by configuration. Medical Outfitters returns a quote within one business day. Submit a request online or call (305) 885-4045. The Stratos C is positioned as an accessible bone density machine for practices that need professional DXA capability at a lower acquisition cost than large-format systems.
Pencil-beam DXA passes a narrow X-ray beam over the target anatomy and collects the transmitted energy to produce a high-resolution bone density image. The Stratos C uses an enhanced pencil-beam design for improved image clarity and faster scan completion compared to earlier-generation systems.
Yes. The Stratos C integrates with 3D-DXA technology to convert standard femur scans into three-dimensional bone visualizations. Cortical and trabecular compartments are assessed separately, providing clinicians with deeper bone microstructure data for fracture risk decisions.
Yes. The Stratos C performs full-body composition scans including fat and lean tissue color mapping and metabolic indicator data output, supporting sports medicine, endocrinology, and wellness body composition programs from a single bone density scan machine.
Yes. FDA cleared for bone mineral density measurement and body composition assessment. The Stratos C also holds CE Class IIb certification under the EU Medical Device Directive (93/42/EEC), certified by SGS CE1639. It is manufactured by APELEM and designed in France by DMS Imaging, the European leader in bone densitometry equipment. Medical Outfitters Inc. is ISO 13485:2016 certified as the supplying distributor.
Yes. FRAX, the Sheffield University fracture risk assessment tool available for more than 50 countries, is integrated directly into the Stratos C workflow. Sarcopenia assessment based on published clinical definitions is also included, tracking skeletal mass, quality, and strength for at-risk patient populations.
The Stratos C includes an intuitive software suite with patient repositioning tools, automated report and letter generation, longitudinal patient progress tracking, and full data import/export for referring providers and EMR systems.
Through Medical Outfitters Inc., ISO 13485:2016 certified, Miami, FL. Factory-new units with nationwide installation support. Call (305) 885-4045 or request a quote online.
Compatible Equipment
Bone density scanning equipment commonly deployed alongside the DMS Imaging Stratos C, from higher-capacity DMS densitometry platforms for multi-room programs to the digital radiography systems used for follow-up skeletal imaging.
DMS Stratos Bone Densitometer
DXA densitometer · full-body scan · bone mineral density · body composition
View Product
DMS Stratos DR Bone Densitometer
DR DXA densitometer · high-volume · full-body · 3D-DXA capable
View Product
Fujifilm FDR Smart X
Digital radiography · skeletal follow-up imaging · DR detector · PACS/DICOM
View ProductRequest a Quote Today
Get in touch with Medical Outfitters today to request your personalized quote and outfit your facility with confidence.
