27″ 4K Surgical Monitor with Mini-LED – LG 27HQ710S

Mini-LED Backlight: 1,500 local dimming zones deliver precise zone-by-zone brightness control, isolating a bright surgical field from darker instrument shadows in the same frame without the halo blooming typical of edge-LED surgical monitors.
Peak Brightness: 2,000 cd/m2 peak output for visibility under intense operating room lighting, and 800 cd/m2 typical for sustained surgical sessions.
DICOM Part 14: compliant for consistent grayscale when displaying radiographic reference images during hybrid operating room and interventional procedures.
DCI-P3 98 percent and sRGB 139 percent area: a wide color gamut that renders tissue color, vascular anatomy, and fluorescence imaging beyond standard sRGB surgical monitors.
HDR10 and HDR Effect: dynamic range processing that preserves highlight and shadow detail during high-contrast surgical imaging.

3G-SDI, in and out: SDI loop-through supports surgical cameras, endoscopes, and signal routing that use the 3G-SDI cabling standard already deployed across most hospital operating rooms, with no forced SDI infrastructure upgrade.
DVI, in and out: DVI with a loop-through output for legacy surgical cameras and anesthesia workstation connectivity.
HDMI 2.0: high-definition input for modern operating room source devices, navigation systems, and imaging workstations.
DisplayPort, in and out: DisplayPort with a loop-through output for high-resolution workstation connectivity and secondary display distribution.
USB 3.0: one upstream and one downstream port for peripheral connectivity.

4PBP, 4 picture by picture: display up to four independent video sources at the same time on a single 27 inch 4K panel, such as an endoscope, fluoroscopy, navigation imaging, and a vital signs monitor, which reduces the number of monitors on the surgical boom for minimally invasive and laparoscopic procedures.
PIP, picture in picture: overlay a secondary source within the primary endoscopic field, which suits fluorescence imaging or navigation overlays without interrupting the main video feed.
Mirror Mode: duplicate the primary signal output to a gallery monitor or secondary viewing position.
Rotation Mode: rotate the display output for vertical instrument or scope visualization.

Automatic Failover: the 27HQ710S monitors the active input signals and automatically switches to a pre-designated backup input on signal loss across SDI, HDMI, DVI, and DisplayPort, which maintains the surgical display without manual intervention during active procedures.
Failover Benefit: signal continuity is maintained during cable faults, connector issues, or source device failures, which reduces disruption to the surgical team and prevents a display blackout during critical procedure stages.
Two Hot Keys: dedicated hardware buttons for rapid recall of two saved display presets, useful for instant switching between standard surgical video and fluorescence or indocyanine green imaging profiles.

IP45 Front Panel: dust tight and protected against water jets from any direction, which withstands operating room fluid splash, antiseptic spray, and routine surface disinfection without damage to internal components.
IP32 Rear Panel: protected against dripping water, which protects cabling connections from condensation or overhead fluid.
IK06 Impact Resistance: protects the display against accidental contact with surgical instruments or equipment.
Optical Bonding: eliminates the air gap between the panel and the 1.3 millimeter protection glass, which reduces internal reflections and improves contrast under operating room lighting, with anti-reflection and anti-fingerprint coatings.
VESA Mount: 200 by 100 millimeters and 100 by 100 millimeters for surgical boom, pendant arm, wall, or ceiling mount. A stand is not included, and the monitor weighs 8.0 kilograms.