LG 32HL710S: 31.5" 4K IPS Surgical Monitor
Authorized LG medical imaging equipment supplier. The 32HL710S is a large-format surgical display engineered for precision and team-wide visibility in the operating room. It addresses two persistent problems. The limited screen size of standard 27 inch surgical monitors often forces multiple display setups, and the imaging quality gap between consumer and medical-grade displays leaves detail on the table. The 31.5 inch 4K IPS panel answers both.
The 32HL710S works with your existing 3G-SDI laparoscopic tower infrastructure, so there is no AV rack overhaul and no 12G-SDI upgrade required. A high brightness of 800 cd/m², a 1300 to 1 contrast ratio, an sRGB 115 percent wide color gamut, and HDR10 handle demanding endoscopic and fluoroscopic imaging. DICOM Part 14 and hardware calibration through True Color Pro keep the image accurate over time, and 4PBP multi-view consolidates up to four video sources onto one 31.5 inch display, which cuts monitor count in complex hybrid operating room setups.
Need pricing? Get a quote with lead times and volume discounts within one business day.
Large 4K Canvas, True Color Pro Calibration, and OR-Grade Durability
Three things set the 32HL710S apart from a standard surgical monitor. The 31.5 inch 4K panel gives the entire team a clear view without a secondary display, hardware calibration through True Color Pro with DICOM Part 14 keeps the image accurate over time, and IP35 and IP32 ratings with IK06 and anti-reflection protection glass keep it running reliably in a sterile operating room. Full technical detail is in the expandable sections below.
Panel: 31.5 inch IPS, 3840 by 2160 4K UHD, 16:9
Brightness, typical: 800 cd/m²
Contrast Ratio: 1300:1
Viewing Angle: 178° horizontal and 178° vertical
Color Gamut: sRGB 115 percent area, with over 99 percent sRGB coverage
HDR: HDR10
Response Time: 5 ms in faster setting, 14 ms standard
DICOM: Part 14 with brightness stabilization
Hardware Calibration: True Color Pro for consistent grayscale and color over the life of the display
Flicker Safe: reduces screen flicker for comfortable viewing during long operating room sessions
Protection Glass: 1.6 millimeter with anti-reflection and anti-fingerprint coating, which reduces glare from operating room ceiling lights and resists smudging from gloved hands
IP35, front: dust tight and protected against water spray from all directions, and compatible with operating room grade disinfectant protocols
IP32, except the front: protected against dripping water and solid particles
IK06: withstands 1 joule of impact energy, which handles the physical demands of transport and repositioning during setup
How the 32HL710S compares against a standard 27 inch surgical monitor:
Most laparoscopic towers, endoscopy systems, and HD surgical cameras in use today output 3G-SDI. The 32HL710S connects to them directly, with no 12G-SDI infrastructure upgrade, no SFP modules, and no new AV racks, which extends the value of your current equipment. Hardware calibration through True Color Pro and DICOM Part 14 keep the displayed image consistent and accurate over time, and the large 31.5 inch 4K canvas gives the whole team a clear view.
Full Technical Specifications
Complete reference data for procurement, RFP submissions, and biomedical review. Hospital purchasing teams, imaging technology managers, and biomedical engineers rely on this specification set when they evaluate operating room surgical displays. Expand each category for full detail.
| Resolution | 4K UHD, 3,840 × 2,160 |
| Panel Type | IPS |
| Screen Size | 31.5 inch, 16:9 |
| Brightness, typical | 800 cd/m² |
| Contrast Ratio, typical | 1300:1 |
| Color Gamut | sRGB 115 percent area, over 99 percent coverage |
| HDR | HDR10 |
| Viewing Angle | 178° horizontal and 178° vertical |
| Response Time | 5 ms in faster setting, 14 ms standard |
| Surface Treatment | Protection glass, 1.6 mm, anti-reflection and anti-fingerprint |
| Dimensions, without stand | 764.6 × 480.8 × 94.4 mm |
| Weight, without stand | 12.4 kg, which is 27.3 lbs |
| IP Rating, front | IP35 |
| IP Rating, except front | IP32 |
| Impact Protection | IK06, withstands 1 joule of impact |
| VESA Wall Mount | 200 × 100 mm and 100 × 100 mm |
| Input Terminals | HDMI × 1, DisplayPort × 1, DVI × 1, 3G-SDI × 1 |
| Output Terminals | DisplayPort × 1, DVI × 1, 3G-SDI × 1 |
| USB | USB, 1 upstream and 1 downstream |
| Multi-View | 2, 3, and 4 picture by picture, plus picture in picture |
| AC Input | 100 to 240 V AC, 50 to 60 Hz |
| Power Consumption, maximum | 120 W |
| Power Consumption, DC off | Less than 0.3 W |
| PBP and PIP | 2, 3, and 4 picture by picture, plus picture in picture |
| Screen Flip | Mirror Mode and Rotation Mode, rotates 180 degrees |
| Failover Input Switch | Automatic switch to a backup source |
| DICOM Compliant | Yes, Part 14 with brightness stabilization |
| Hardware Calibration | Yes, True Color Pro |
Clinical Applications
Deployed across operating room environments where team-wide 4K visualization, 3G-SDI infrastructure compatibility, and operating room grade durability are the primary requirements.
3G-SDI integrates directly with existing laparoscopic tower equipment, so the large 4K panel deploys without a 12G-SDI upgrade or new AV racks.
An sRGB 115 percent gamut and HDR10 reveal tissue color and shadow detail from endoscopic camera feeds that standard surgical displays underrepresent.
The 31.5 inch 4K canvas gives every team member a clear view from all positions around the operating room table, which reduces secondary monitor requirements.
4PBP displays endoscopy, fluoroscopy, navigation, and vitals on one screen, which consolidates display overhead in multi-source hybrid setups.
DICOM Part 14 with brightness stabilization and True Color Pro calibration support accurate fluoroscopic and intraoperative reference imaging alongside live camera feeds.
The large 31.5 inch display and 178 degree wide viewing angle let residents and observers follow procedures clearly without crowding the sterile field.
3G-SDI, 4PBP, and Automatic Failover
Designed to slot into existing operating room ecosystems without new AV infrastructure. The 32HL710S is compatible with all major laparoscopic tower systems, endoscopy platforms, and operating room AV routing that use 3G-SDI. The expanded detail on inputs, multi-view modes, failover, calibration, and power is in the expandable sections below.
HDMI x1: connects 4K cameras, a PC, or image management systems.
DisplayPort in and out: supports high frame rate 4K sources with loop-through.
3G-SDI in and out: directly compatible with the vast majority of laparoscopic tower cameras, endoscopy systems, and HD surgical cameras already installed in most operating rooms, so there is no 12G-SDI infrastructure upgrade required and the monitor plugs into existing AV racks.
DVI-D in and out: provides legacy system input with loop-through.
USB: one upstream and one downstream for firmware updates and peripherals.
2, 3, and 4 picture by picture: display up to four independent sources side by side on the 31.5 inch 4K panel, such as endoscopy, vital signs, fluoroscopy, and navigation, all visible at the same time.
PIP: overlay a secondary source in a resizable window over the primary image.
Mirror Mode: flip the image horizontally to match surgical camera orientation.
Rotation Mode: rotate the output 180 degrees for non-standard boom arm mounting positions.
The 32HL710S monitors signal integrity on the active input and automatically switches to a designated backup source if the primary signal is lost, across HDMI, SDI, DVI, or DisplayPort, without manual intervention. In a live surgical environment with multiple imaging sources connected, this failover layer keeps visualization continuous throughout critical procedures. The main input and the backup input are set in the monitor menu.
True Color Pro hardware calibration: calibrates the display at the hardware level to keep color and grayscale consistent over the life of the panel.
DICOM Part 14: grayscale standard display function compliance with brightness stabilization for accurate fluoroscopic and intraoperative reference imaging across extended operating room sessions.
AC Input: 100 to 240 V AC, 50 to 60 Hz, with a maximum power consumption of 120 watts and less than 0.3 watts when off.
IP35, front: dust tight and protected against water spray from any angle, and compatible with operating room grade disinfectants.
IP32, except the front: protected against dripping water and solid particles.
IK06: withstands 1 joule of impact energy.
Weight, without stand: 12.4 kilograms, which is compatible with standard surgical boom arms and ceiling pendant systems.
VESA: 200 by 100 millimeters and 100 by 100 millimeters are supported, and a stand is not included.
Regulatory Compliance and Safety
FDA Class I registration, CE marking under the Medical Device Regulation, and IEC 60601-1 electrical safety certification. Medical Outfitters is an ISO 13485:2016 certified supplier of medical imaging equipment, so every 32HL710S ships through a documented and audited quality management system. Full compliance documentation is available in the expandable sections below.
FDA Class I: registered as a Class I medical device with the United States FDA, suitable for use in hospital operating rooms and clinical environments.
CE marked: compliant with the European harmonized standards EN 60601-1 and EN 60601-1-2 under the Medical Device Regulation.
ISO 13485: Medical Outfitters is independently ISO 13485:2016 certified as a medical imaging equipment supplier.
IEC 60601-1: meets the general safety requirements for medical electrical equipment.
IEC 60601-1-2: meets the electromagnetic compatibility requirements, so the monitor does not interfere with other operating room equipment, patient monitors, or AV control systems.
cUL: certified to ANSI/AAMI ES 60601-1 and CSA C22.2 No. 60601-1 for the United States and Canada, and FCC Part 15 Class A.
RoHS: compliant with the Restriction of Hazardous Substances directive.
REACH: compliant with the European Union REACH chemical regulation.
WEEE: compliant with the European Union Waste Electrical and Electronic Equipment directive.
OR AV Compatibility & Integration Review
Provide your laparoscopic tower model, boom arm specifications, SDI routing configuration, and room dimensions. Our team confirms full compatibility with your existing operating room AV equipment before your order ships.
Hospital Procurement & RFP Support
Volume pricing, technical documentation, and logistics for multi-OR deployments. We support biomedical engineers, operating room directors, and hospital purchasing departments sourcing surgical display equipment. Contact us for RFP packages.
Frequently Asked Questions
Quick answers to the most common purchase and technical questions about the LG 32HL710S surgical display. Tap any question to expand.
No. The LG 32HL710S is designed for wall, surgical boom arm, or ceiling pendant mounting. The VESA pattern is 200 by 100 millimeters and 100 by 100 millimeters, and the monitor weighs 12.4 kilograms without a stand, which is compatible with standard boom arms and ceiling pendants. Our team can advise on compatible mounting solutions for your operating room.
The larger 31.5 inch 4K display lets the entire surgical team view the procedure clearly from multiple positions around the operating room table, which reduces the need for secondary monitors and improves collaboration. Combined with up to four picture by picture, one display can carry all of the feeds from your imaging equipment at the same time.
Yes. The 32HL710S supports up to four picture by picture, so the surgical team can monitor endoscopic, fluoroscopic, navigation, and vital signs feeds on a single large display, which consolidates multiple sources onto one viewing surface.
Yes. The 32HL710S connects through 3G-SDI, DisplayPort, DVI, and HDMI, so it works directly with the laparoscopic towers, endoscopy systems, and HD surgical cameras already installed in most operating rooms. There is no need for a 12G-SDI infrastructure upgrade, SFP modules, or new AV racks.
Yes. The 32HL710S is DICOM Part 14 compliant with brightness stabilization, and it includes hardware calibration through True Color Pro. Together these keep grayscale and color rendering consistent and accurate across long operating room sessions and over the life of the display.
Yes. The LG 32HL710S is FDA Class I registered, CE marked under the Medical Device Regulation, and certified to IEC 60601-1 and IEC 60601-1-2 for medical electrical devices, so it is suitable for use in hospital operating rooms and procedure suites.
Mirror Mode flips the image horizontally to match surgical camera orientation for intuitive hand and eye coordination during minimally invasive procedures. Rotation Mode rotates the output 180 degrees for non-standard boom arm mounting positions.
Through Medical Outfitters Inc., an ISO 13485:2016 certified supplier based in Miami, FL. We supply factory-new units with nationwide installation support. Call (305) 885-4045 or request a quote online.
Compatible Equipment
Medical imaging equipment commonly deployed alongside the LG 32HL710S in surgical suites. If you need single-cable 12G-SDI over fiber, see the LG 32HL714S, the 12G-SDI SFP version of this monitor.
LG 32HR734S-W Mini-LED Surgical Monitor
31.5" Mini-LED · 2,000 cd/m² peak · IP45 · Clone Screen · DCI-P3 98%
View Product
LG 55" 4K IPS Surgical Monitor
Large-format overhead OR display · 12G-SDI · 4PBP · IP45 and IP32
View Product
Ziehm Vision FD Flat Detector C-Arm
Primary SDI video source · flat detector · fluoroscopy · OR and cath lab
View ProductRequest a Quote Today
Get in touch with Medical Outfitters today to request your personalized quote and outfit your facility with confidence.
