GE MRI Machine Price Guide (2026): Signa HDxt, Optima MR450w and Discovery MR750w

How Much Does a GE MRI Machine Cost?

A GE MRI machine price is set by field strength first and generation second, because every GE system on the used market is a superconducting magnet from one of two platform families, the 60 cm HD platform and the 70 cm wide-bore platforms that replaced it, and the configuration moves a quote more than the badge does. The figures are Medical Outfitters ranges for a system delivered, installed and warrantied; a refurbished GE saves 40 to 60 percent against the new system on the same platform.

GE MRI machine cost in 2026, Medical Outfitters all-in ranges, the GE rows of the MRI machine cost guide’s price list gathered by field strength; the new rows are estimates of current list pricing printed for comparison, not a Medical Outfitters offer.

The same question arrives as GE MRI machine price, GE MRI price, GE MRI cost, GE MRI machine cost, GE MRI scanner price and GE Signa price, and the table answers all of them. Searches for a GE MRI for sale or a used GE MRI land on the refurbished rows, where nearly the whole GE market buys; our current units are on the used MRI machines for sale page and in the MRI machines category. A GE figure quoted without delivery, installation and a warranty is an equipment-only price, and a figure quoted without the channel count, the coil list and the software release is not a usable number at all.

Equipment-only prices vs the all-in GE MRI price

Most GE MRI prices published online are equipment-only figures for a magnet on a loading dock, which is why they read lower than a delivered, installed and warrantied system. The comparison below, from our MRI guide, puts the two side by side for the two classes GE sells into; column A is a comparison estimate, not a Medical Outfitters price.

Averages hide the generation split. Across the GE systems we quote, a refurbished 1.5T averages in the middle of the band delivered and installed, because the Signa HDxt outnumbers the Optima MR450w on the used market and prices below it, and a refurbished 3T averages in the lower half of its band because the Discovery MR750w standard configuration is the one most sites buy. An average GE MRI price quoted without the platform is not a usable number.

GE MRI Machine Price by Model (2026): Signa HDxt, Optima MR450w and Discovery MR750w

The GE MRI machine price list below places the three GE platforms we refurbish, at both field strengths, inside the bands above. Each one is rebuilt through MO Select, tested against the GE specification, delivered and installed by our own crews and covered by a written warranty. Each row’s new figure is an estimated list price for GE’s current platform in that class, printed for comparison only. The Signa HDxt and Optima MR450w are common in mobile coaches; what a mobile unit costs to rent or buy is in our mobile MRI rental, lease and purchase guide.

GE MRI machine price by model, Medical Outfitters ranges delivered, installed and warrantied; the sub-ranges follow the configurations on each model guide.

Three notes on the rows. A GE Signa HDxt price depends on the channel count first and the software level second: an 8 channel system on 15.x or 16.x software sits at the bottom of the 1.5T band and a 16 channel system on 23.x software with an expanded coil set at the top of its range, and a GE Signa 1.5T price today almost always means an HDxt, because it is the most supportable used GE MRI on the market and the lowest-cost route to a hospital-grade 1.5T. A GE Optima MR450w price turns on GEM, decided at build: the posterior array in the table and the anterior arrays that go with it are the configuration high-throughput sites want, and a GEM system with later DV software takes the top of the band. A GE Discovery MR750w price follows the same split one field strength up, with the advanced applications and the 3T coil set on top; the MR750w costs roughly twice the MR450w, and the Signa HDxt 3T is the lowest-cost GE 3T because it is the previous generation on a 60 cm bore.

GE MRI Price by Generation and Year

GE’s closed-bore MRI history divides into three generations on the used market, and the price follows them.

Used GE MRI price by year of manufacture

Year of manufacture is the quickest way to place a used GE MRI inside its band before the configuration is known. The figures are the 1.5T and 3T columns of the used MRI table on our MRI guide with the GE platforms of each period named, and the 2013 to 2017 cells are the GEM configurations from the model guides; refurbished, delivered, installed and warrantied.

Two cautions carry across every year. The HD-era magnets consume helium and need fills, and the HDxt is not zero boil-off on every build, so the fill history and the cold head hours on the day of survey decide more than the model year; the wide-bore platforms improved on that, and on them the cold head is the service item. And the software level sets the support horizon: a GE system on 23.x software, or a wide-bore system on a later DV release, has years of support ahead, where an earlier release decides which sequences and which coils the system can run. How long an MRI machine lasts covers the support horizons and the used MRI machine buying guide sets out what to check on any used magnet before the price is agreed.

GE MRI Price by Configuration: Channels, GEM, Software and Coils

A GE quote is described by four things, and the table below is how the used market labels them: the channel count, the coil suite (GEM or standard on the wide-bore platforms), the coil list and the software release. The ranges are the configuration rows of the three model guides.

GE MRI price by configuration; every row is MO Select refurbished, delivered, installed and warrantied.

• Channel count. The Signa HDxt was built with 8 or 16 receive channels, and 16 channels support higher parallel imaging factors and multi-element coils, so exams run faster; the Optima MR450w and Discovery MR750w carry 32. More channels move a quote up a tier, and the coils must match the channel count.
• GEM or standard, decided at build. The Geometry Embracing Method suite builds a posterior array into the table and pairs it with lightweight anterior arrays that conform to the patient, so most exams run without repositioning coils and large patients are covered edge to edge. GEM systems carry the premium on both wide-bore platforms, and a GEM table with a missing anterior array is not a GEM system in practice, so confirm it from the table and the coil list rather than the listing.
• Software release. On the HDxt the 23.x releases carry the widest sequence library (PROPELLER motion correction, LAVA and IDEAL body imaging, Cube 3D and the cardiac and vascular packages are licensed by software level) and command a premium over 15.x and 16.x; on the wide-bore platforms the later DV releases carry more sequences and support more coils. The applications are licensed per unit, so get the release and the licensed packages in writing.
• The coil list. Every missing coil on a used system is a five-figure item, GEM anterior arrays are the expensive ones, and on a 3T a complete coil set is a six-figure line. Price the coil list by name and channel count, not the console, and test the posterior array in a GEM table too.
• Magnet, helium and cold head. HDxt magnets consume helium, so a documented fill and cold head history is worth paying for; on the wide-bore platforms the helium log and the cold head service record are the questions to ask. On any 3T the gradient coil is the most expensive component to replace, and the MR750w’s 44 mT/m gradients work hard, so ask for the gradient fault history and what has been replaced in the cabinets.
• Support status. GE kept the HDxt in service because of its installed base and the independent parts and service market is one of the deepest in MRI, so an HDxt on 23.x software is a supportable buy; an HDxt on an early release prices at the bottom of its band whatever its hours, because the support horizon is shorter.

MO Select Refurbished GE MRI: What Is Included

MO Select is the Medical Outfitters line of certified pre-owned imaging systems, and GE and Siemens are the two makes we refurbish through it, because their installed bases keep parts plentiful and engineers familiar. A GE system carries the badge only after our own engineers have rebuilt it and tested it against the manufacturer specification; the quote states the scope in writing, so there is no guessing about what arrives on the truck.

• The system, tested to specification: the magnet surveyed, the cold head hours and the helium level documented, the gradients and the RF chain tested, the coils tested one by one including the posterior array in a GEM table, the software release and the licensed applications confirmed on the unit.
• Delivery, rigging and installation by our own crews across the United States, Puerto Rico and the Caribbean, with site planning against the GE drawing for the specific system; how an MRI is moved lays out the sequence from site survey to ramp-up.
• Applications training and a written warranty, with the coils inside it, and a service plan offered in the same quote through the engineers who rebuilt the platform, backed by more than 20,000 parts in stock in Miami.
• Any GE configuration not in stock, such as a 16 channel HDxt on 23.x software or a GEM MR750w with a particular coil set, is found pre-owned, tested, delivered, installed and warrantied by Medical Outfitters the same way.

The refurbished imaging equipment page explains what every MO Select system includes, and refurbished versus OEM certified explains how an MO Select rebuild differs from a manufacturer-refurbished unit; current GE units are on the used MRI machines for sale page. If you are replacing rather than adding, we also buy used imaging equipment.

New GE MRI Price: Signa Explorer, Creator, Artist, Voyager, Architect and Premier

Medical Outfitters does not sell GE MRI systems new and does not source them new; our new-equipment range is Fujifilm and Esaote, and every GE system we supply is pre-owned, refurbished through MO Select. The new bands on this page are estimates of current list pricing, printed for comparison only: $1,200,000 to $2,000,000 for the current GE 1.5T platforms and $2,100,000 to $3,700,000 for the current GE 3T, the new cells of our MRI guide’s GE rows.

• Signa Explorer and Creator (1.5T). The platforms that succeeded the HDxt; few refurbished units circulate and they are quoted per unit.
• Signa Artist and Voyager (1.5T). The platforms that succeeded the Optima MR450w; a refurbished Artist or Voyager is a 2018-and-newer system quoted per unit, and most wide-bore 1.5T buyers choose a refurbished MR450w instead.
• Signa Architect and Premier (3T). The current 3T platforms that succeeded the Discovery MR750w; a refurbished Premier is a 2018-and-newer system quoted per unit, and most 3T buyers choose a refurbished MR750w instead.
• The alternative sold new: the Fujifilm ECHELON Smart 1.5T, ECHELON Smart with SynergyDrive and ECHELON Smart ZeroHelium, which Medical Outfitters sells new as an authorized dealer at $1,025,000 to $2,000,000; they are priced on the MRI guide’s price list. Medical Outfitters does not sell or source 3T systems new; the 3T buyer’s route is a refurbished MR750w or Skyra.

GE vs Siemens and Philips MRI Price

Brand moves an MRI quote less than field strength does: a refurbished 1.5T GE and a refurbished 1.5T Siemens sit in the same $475,000 to $975,000 band, and a refurbished 3T from either sits in the 3T band. What separates two quotes is magnet age and helium behaviour, the coil set, the software licenses and the support horizon. The table places each GE platform against its Siemens and Philips equivalent, refurbished, from the model guides.

Three things are specific to GE in that comparison. GE has the largest installed base of any MRI manufacturer, so the used market in magnets, coils and engineers is the deepest, which is why the Signa HDxt anchors the bottom of the 1.5T band and why GE and Siemens are the two makes we refurbish. The GE wide-bore platforms are distinguished by the GEM coil suite, where Siemens’ Tim 4G platforms are distinguished by channel count and the Aera’s gradient type and Philips’ Ingenia by its dStream digital coils, each of which is a line on a used-system quote. And the HD-era GE magnets consume helium and need fills, where the Tim 4G and Ingenia magnets are zero boil-off designs, so an HDxt quote carries a helium history and a cold head record that an Aera quote does not. On image quality at the same field strength and bore size the top systems from all three makers compare well, which is the one rule our MRI manufacturers comparison carries through every class; the Siemens platforms are priced together on our Siemens MRI machine price guide and the Philips Ingenia on its guide. Every Philips platform is priced on one page in our Philips MRI machine price guide.

Siting and Running Cost on a GE MRI

Every GE system on this page is a superconducting magnet, so the room is the same project as for any closed-bore MRI: an RF-shielded enclosure sized for the system, magnetic shielding where the 5-gauss line would cross a corridor or the floor above, a quench vent, a chiller, a floor that takes the magnet and a route in for it. We do not publish a standard room size, because the honest answer comes from the GE site planning drawing for the specific system. A 60 cm Signa HDxt, at 5,532 kg with cryogens, reuses the room most 1.5T systems already occupy, and a 70 cm Optima MR450w, at 5,322 kg, fits most existing 1.5T rooms after a survey of the RF shielding, chiller and power supply; a Discovery MR750w needs a 3T room engineered for a larger fringe field, RF shielding at 128 MHz, higher floor loading and vibration control, so a site replacing a 3T usually reuses the room and a first 3T is a construction project. Our MRI room shielding and size requirements post covers RF shielding, magnetic shielding, structural loading, the quench vent and the 5-gauss line for every class.

Running cost follows the magnet. A service contract priced per year as a percentage of system value, the cold head on a replacement interval, the chiller, the helium on an HD-era magnet, and the coil set, which is the component most worth covering, are the list; on a 3T the gradient coil is the high-cost part and a 3T service contract is the largest running cost after staff. The clause that decides whether a contract is complete is coil coverage, and the second is whether the cold head and the cryogens are inside it. Our MRI service, repair and maintenance page explains how a contract is priced and what a preventive maintenance visit covers, and what an MRI helium refill costs covers the cryogen side for the HD-era magnets.

Which GE MRI Should You Buy?

Five questions settle which GE MRI to buy.

• Which field strength? A 1.5T HDxt or MR450w for a general outpatient or hospital schedule, which is where most GE buyers land; a 3T MR750w when the referrals are neuro, musculoskeletal, prostate or research and the room can take the magnet, or an HDxt 3T when 3T signal is wanted at the lowest entry and a 60 cm bore is acceptable. 1.5T vs 3T MRI covers the clinical case, and the 3T MRI machine price guide prices the MR750w and the HDxt 3T against the other 3T platforms.
• Which generation? The MR450w and MR750w when bore size, throughput and the support horizon matter, which is most buyers; the HDxt when budget leads and a 60 cm bore is acceptable, because it is the lowest-cost route to a hospital-grade 1.5T and the deepest parts market in MRI.
• Which configuration? Price the channel count, GEM or standard, the coil list and the software release, not the console: a 16 channel HDxt on 23.x software and an 8 channel HDxt on 15.x are a tier apart, and a GEM MR450w with the full coil set is a different purchase from a standard one.
• What does the survey say? On any used GE: the helium fill history and the cold head hours, an air-and-phantom test on every coil including a GEM posterior array, the software release and which licenses transfer, the gradient fault history on a 3T, and the service file. The used imaging equipment inspection checklist covers the rest.
• Wide bore or open? A 70 cm MR450w or MR750w offers most of the comfort of an open design with full high-field image quality; a claustrophobic, pediatric or bariatric caseload that needs true open access is served by the open class, which has its own page in our open MRI machine cost guide, and wide-bore vs open vs closed MRI compares the three designs.

Tell us what you scan and the room you have, and we will recommend two or three GE systems at the right tier with delivery, installation and a service plan in the quote. Current units are on the MRI machines for sale page and in the MRI machines category.

GE MRI Machine Price: Frequently Asked Questions

How much does a GE MRI machine cost?

A GE MRI machine costs $475,000 to $900,000 refurbished at 1.5T and $1,000,000 to $1,750,000 refurbished at 3T, delivered, installed and warrantied by Medical Outfitters through MO Select: the Signa HDxt 1.5T at $475,000 to $675,000, the Optima MR450w at $600,000 to $900,000, the Signa HDxt 3T at $1,000,000 to $1,300,000 and the Discovery MR750w at $1,100,000 to $1,750,000. Medical Outfitters does not sell new GE systems; the current GE 1.5T is estimated at $1,200,000 to $2,000,000 and the current 3T at $2,100,000 to $3,700,000, comparison only.

How much does a GE Signa HDxt cost?

A GE Signa HDxt price is $475,000 to $675,000 refurbished at 1.5T through MO Select, delivered, installed and warrantied: $475,000 to $575,000 for an 8 channel system on earlier software and $525,000 to $675,000 for a 16 channel system on 23.x software with an expanded coil set. The HDxt 3T is $1,000,000 to $1,300,000. GE followed the HDxt with the Signa Explorer and Creator, so the HDxt is bought refurbished.

How much does a GE Optima MR450w cost?

A GE Optima MR450w price is $600,000 to $900,000 refurbished through MO Select, delivered, installed and warrantied: $600,000 to $775,000 for a standard system on earlier DV software and $700,000 to $900,000 for a GEM system with an expanded coil set and later software. GE followed the MR450w with the Signa Artist and Voyager, so the MR450w is bought refurbished.

How much does a GE Discovery MR750w cost?

A GE Discovery MR750w price is $1,100,000 to $1,750,000 refurbished through MO Select, delivered, installed and warrantied: $1,100,000 to $1,450,000 for a standard system on earlier DV software and $1,300,000 to $1,750,000 for a GEM system with an expanded coil set, later software and advanced applications. GE followed the MR750w with the Signa Architect and Premier, estimated at $2,100,000 to $3,700,000 new and not sold by Medical Outfitters, so the MR750w is bought refurbished.

What is the GE Signa price?

A GE Signa MRI price depends on which Signa: on the used market the name almost always means the Signa HDxt, at $475,000 to $675,000 refurbished at 1.5T and $1,000,000 to $1,300,000 at 3T through MO Select, delivered, installed and warrantied. The current Signa platforms (Explorer, Creator, Artist and Voyager at 1.5T; Architect and Premier at 3T) are not sold new by Medical Outfitters; the current 1.5T is estimated at $1,200,000 to $2,000,000 and the current 3T at $2,100,000 to $3,700,000, comparison only, and pre-owned units are quoted per unit.

How much does a GE 3T MRI cost?

A GE 3T MRI price is $1,000,000 to $1,750,000 refurbished through MO Select, delivered, installed and warrantied: the Signa HDxt 3T at $1,000,000 to $1,300,000, the lowest-cost GE 3T on a 60 cm bore, and the Discovery MR750w at $1,100,000 to $1,750,000, the 70 cm wide-bore 3T with MultiDrive RF transmit and the optional GEM coil suite. Medical Outfitters does not sell or source 3T systems new; the current GE 3T is estimated at $2,100,000 to $3,700,000 for comparison. The 3T room adds fringe-field, shielding and vibration work that a 1.5T room does not.

How much does a new GE MRI cost?

Medical Outfitters does not sell GE systems new and does not source them new; every GE MRI we supply is pre-owned, refurbished through MO Select. For comparison, the current 1.5T platforms (Signa Explorer, Creator, Artist and Voyager) are estimated at $1,200,000 to $2,000,000 and the current 3T platforms (Signa Architect and Premier) at $2,100,000 to $3,700,000, the new cells of our MRI machine cost guide's GE rows. The 1.5T systems we sell new are the Fujifilm ECHELON Smart family, at $1,025,000 to $2,000,000.

Does Medical Outfitters sell GE MRI machines?

Yes, refurbished: the Signa HDxt at 1.5T and 3T, the Optima MR450w and the Discovery MR750w, rebuilt through MO Select, our in-house refurbishment program, each delivered, installed and warrantied across the United States, Puerto Rico and the Caribbean, and any other pre-owned GE configuration found and quoted the same way. We do not sell or source GE systems new. We install and service GE magnets with the same engineers who rebuild them.

Which GE MRI is the cheapest?

A refurbished Signa HDxt 1.5T with 8 channels at $475,000, the bottom of the GE 1.5T band, delivered, installed and warrantied through MO Select; it is the lowest-cost route to a hospital-grade 1.5T on any make. At 3T, the cheapest GE is a Signa HDxt 3T at $1,000,000, and the cheapest wide-bore GE 3T is a standard Discovery MR750w at $1,100,000.

Is a used GE MRI a good buy?

Usually, which is why GE is one of the two makes we refurbish through MO Select: the installed base is the largest in MRI, so parts, coils and engineers are plentiful, and the HDxt, MR450w and MR750w are all supported platforms. The checks are the helium fill history and the cold head hours, an air-and-phantom test on every coil, the software release and which licenses transfer, GEM confirmed from the table and the coil list, the gradient fault history on a 3T, and the service file; an HDxt on an early software release prices at the bottom of its band because the support horizon is shorter.

What does GEM mean on a GE MRI?

GEM, the Geometry Embracing Method, is GE's coil suite on the Optima MR450w and Discovery MR750w: a posterior array built into the table paired with lightweight anterior arrays that conform to the patient, so most exams run without repositioning coils and large patients are covered edge to edge. GEM is decided at build and carries the premium on both platforms, $700,000 to $900,000 on the MR450w and $1,300,000 to $1,750,000 on the MR750w refurbished, against $600,000 to $775,000 and $1,100,000 to $1,450,000 for the standard systems.

Where can I find a GE MRI for sale?

Our current GE units are on the used MRI machines for sale page and in the MRI machines category: the Signa HDxt, Optima MR450w and Discovery MR750w refurbished through MO Select, each delivered, installed and warrantied. Inventory changes weekly; if you are looking for a used GE MRI in a particular configuration, software level or coil set, tell us what you scan and we will find it.